How to Replace a Lamp in a PRM-45 Projector
Replacing the lamp is simple and quick. Follow the steps in this video to do it safely.
Projector Remote Control
YOU WILL NEED
Skip to a section:
Safety precautions - Turn off and unplug the projector at least 30 minutes before replacing the lamp.
Taking off the cover - Remove the screws and store them safely.
Removing the faulty lamp - Disconnect the lamp connector, unscrew the screws and pull the lamp out by its handle.
Installing the replacement lamp - Align the lamp housing with the lamp connector.
Replacing the cover - Secure the cover with the screws.
Resetting the lamp hour counter - Follow the instructions in the Owner's Guide.
Returning the faulty lamp - How to return the faulty lamp to Promethean if it was replaced under warranty.