How to Replace a Lamp in a PRM-25, PRM-32 or PRM-35 Projector

DESCRIPTION

Replacing the lamp is simple and quick. Follow the steps in this video to do it safely.

CHECKLIST

  • PRM-25, PRM-32 or PRM-35 Projector

  • Projector Remote Control

YOU WILL NEED

HIGHLIGHTS

Skip to a section:

Safety precautions - Turn off and unplug the projector at least 30 minutes before replacing the lamp.

00:09

Taking off the cover - Remove the screw and keep it safe.

00:30

Removing the faulty lamp - Disconnect the lamp connector, unscrew the screws and pull the lamp out by its handle.

00:41

Inserting the replacement lamp - Align the lamp housing with the lamp connector.

00:51

Replacing the cover - Secure the cover with the screw.

01:01

Resetting the lamp hour counter - Follow the instructions in the Owner’s Guide.

01:16

Returning the faulty lamp - How to return the faulty lamp to Promethean if it was replaced under warranty.

01:35