Connect your computer to one of the inputs on the ActivPanel, e.g. HDMI 1.
 
Follow the instructions below for your specific version of ActivPanel. To check which version you are using, please refer to article 1477.

ActivPanel 5, ActivPanel 6 and ActivPanel i-Series

Using the remote control:

  1. Press SOURCE
  2. Use the arrow keys to navigate to the relevant port, e.g. HDMI 1
  3. Once the corresponding source is highlighted, press OK to select it

Using the buttons on the front of the ActivPanel:

  1. Press the SOURCE button firmly to display the source list
  2. Tap the relevant port, e.g. HDMI 1


ActivPanel 4.5

Using touch:

  1. Swipe upwards from the bottom of the ActivPanel, above either of the speakers
  2. Tap the relevant port, e.g. HDMI 1

Using the remote control:

  1. Press SOURCE
  2. Use the arrow keys to navigate to the relevant port, e.g. HDMI 1
  3. Once the corresponding source is highlighted, press OK to select it

Using the buttons on the front of the ActivPanel:

  1. Press the SOURCE button firmly to display the source list
  2. Use the arrow keys on the ActivPanel to navigate to the relevant port, e.g. HDMI 1
  3. Once the corresponding source is highlighted, press MENU to select it


ActivPanel 4

Using the remote control:

  1. Press SOURCE
  2. Tap the relevant port, e.g. HDMI 1
  3. Once the corresponding source is highlighted, press OK to select it

Using the buttons on the side of the ActivPanel:

  1. Press the SOURCE button firmly to display further options
  2. Tap the SOURCE icon on screen
  3. Tap the relevant port, e.g. HDMI 1
  4. Wait for the on screen menu to disappear before using the ActivPanel interactively


ActivPanel 3 and previous versions

Using the remote control:

  1. Press SOURCE
  2. Use the arrow keys to navigate to the relevant port, e.g. HDMI 1
  3. Once the corresponding source is highlighted, press OK to select it

Using the buttons on the front of the ActivPanel:

  1. Press the SOURCE button firmly to display the source list
  2. Use the arrow keys on the ActivPanel to navigate to the relevant port, e.g. HDMI 1
  3. Once the corresponding source is highlighted, press MENU to select it