Required tools:

  • Philips screwdriver
  • Ratchet

Please switch off the projector, unscrew and disconnect the cables at the back.

User-added image

User-added image

Remove the thumbscrew.

User-added image

Allowing the projector-mounting arm to slowly unhinge.

User-added image

Now carefully lift the projector and attached mounting from the horizontal arm, leaving the arm stationary and still attached to the system.

User-added image

The projector should be fully detached from the system. For a warranty replacement, you will need to remove the screws which fasten the mounting bracket to the projector. Do not return any fixings with the faulty projector as they will be required to fit the replacement to the system.

User-added image