LCD projectors (PRM-10, PRM-20 and PRM-30)
With a working lamp inserted and with the projector switched on, press and hold the ON-OFF button for approximately 30 seconds. After this time, you will see a counter menu appear in the top left corner of the ActivBoard for 5 seconds. Please record the corresponding value (the bottom number).
NB: If you are replacing a lamp, once you have captured the corresponding value press the MENU button on the remote control. Using the arrow keys, go across to the Setting menu and down to the Lamp counter menu. Press the SELECT button then select the Reset option. You will see Lamp replacement counter Reset? Select Yes to continue.
DLP projectors (PRM-25, PRM-32, PRM-35, PRM-45, EST-P1 and UST)
With a working lamp inserted and with the projector switched on, press the Status button on the remote. Please record the Lamp Hours (both Normal and Bright).
NB: If you are replacing the lamp, after capturing the lamp hours please reset the counter. For information on replacing your lamp and resetting the lamp hours, please refer to your projector user manual.