This article is designed to help connect your Windows laptop to an external video display, such as a projector.

Firstly, connect your projector to your laptop using a VGA cable. There are 2 VGA ports (Computer 1 and Computer 2) on the back of your projector. Make a note of which VGA port your cable is connected to.

If you are using a Sanyo projector, a PRM-10 or PRM-20 projector, press the MENU button on your remote control and use the arrow keys to highlight the relevant VGA port (Computer 1 or Computer 2) then press SELECT. Another menu will appear. Using the arrow keys, highlight RGB or RGB Analogue then press SELECT. (Do not select RGB SCART or RGB Composite). Press MENU to exit.

If you are using a PRM-30 projector, press the relevant key on your remote control (Computer 1 or Computer 2). You may need to press the button several times to cycle through the options. Make sure you select RGB and not SCART.

If using a PRM-32, PRM-35, EST-P1, UST or PRM-45, press the Source button and select either VGA 1 or VGA 2. Press Menu to exit.
 

Windows 7 or later

Locate the Windows key (at the bottom left of your keyboard) then press P.

User-added image

Click Duplicate. Alternatively use the arrow keys to highlight this option and hit Enter. The image will now be displayed on your laptop screen and projected onto your ActivBoard.
 

Windows Vista

Right click on the desktop and select Personalize from the menu. In the window that appears, click Display Settings then Advanced Settings.

In this window you should see a tab for your graphics chipset. Click this tab then set your laptop to dual display or clone mode. The image will now be displayed on your laptop screen and projected onto your ActivBoard.
 

Windows XP

Right click on the desktop and select Properties from the menu. The Display Properties window will appear. Click Settings and locate the Display dropdown. Click the dropdown and take note of the name of your graphics chipset.

User-added image

Click Advanced, and then select your graphics chipset from the list below for further instructions. If your graphics chipset is not listed, please see the Other manufacturers section.

Intel

Navigate to the Intel tab then click Graphics Properties.

User-added image

You will see a list of devices as follows:

User-added image

In this example there is only one device but you should see your projector listed here. If not, please check your cables are connected correctly.

Click on the Clone button, then Apply and OK. The image will now be displayed on your laptop screen and projected onto your ActivBoard.

NVIDIA

Navigate to the NVIDIA tab.

User-added image

If you cannot see the menu on the left hand side, click the little green arrow to expand it.

Click nView Display Mode, then Detect Displays.

User-added image

Select the Clone button, then Apply and OK. The image will now be displayed on your laptop screen and projected onto your ActivBoard.

ATI/Radeon

Navigate to the Displays tab. You will see options for Monitor and Panel in this window.

User-added image

Ensure that the blue icon with a circle inside is selected, click Apply and OK. The image will now be displayed on your laptop screen and projected onto your ActivBoard.

SIS

Navigate to the Utility Manager tab and click Driver Mode Settings.

User-added image

From the Display Mode dropdown, change Single to Mirror. Click OK. The image will now be displayed on your laptop screen and projected onto your ActivBoard.

Other manufacturers

If your graphics card is not listed, it is still possible to toggle the image so it is displayed on your laptop screen and projected onto your ActivBoard. Press and hold the Fn key at the bottom left of your keyboard, then press the relevant F key for your laptop as follows:

 User-added image

You may need to press the Fn + F key combination multiple times so that the image is displayed on your laptop screen and projected onto your ActivBoard.