1035
After replacing the lamp, you should also reset the lamp hour counter. This will stop your projector’s Lamp Replace indicator from lighting up until it is necessary to change the lamp again.

Do not reset the lamp hour counter before replacing the lamp.

Please locate your projector model from the list below and follow the instructions.

UST, EST-P1, PRM-45, PRM-35, PRM-32, PRM-25

  1. Press the MENU button on the remote control and use the arrow keys to move to Installation II.
  2. Use the arrow keys to move down to the Advanced option. Press the right arrow key or Enter button.User-added image
  3. Use the arrow keys to move down to the Lamp Hour Reset option. Press the right arrow key or Enter button. User-added image
  4. A message appears. Press the arrow keys in the following order to reset the lamp hours: down, up, left, right.User-added image
  5. Press the MENU button to exit.

PRM-30

  1. Press the MENU button and use the arrow keys to move down to the Setting menu. Press the right arrow key or SELECT button.
  2. Use the arrow keys to select Lamp counter and then press the SELECT button. Use the arrow keys to select Lamp counter reset and then press SELECT.User-added image
  3. A message appears. Select Yes to continue.User-added image
  4. Select Yes again to reset the lamp counter. User-added image

PRM-20 and PRM-10

  1. Press the MENU button on the remote control. Use the right arrow key to select the Settings menu, represented by a spanner and screwdriver icon.
  2. Press the down arrow key until you reach the Lamp counter menu, represented by a light bulb and screwdriver icon. Press SELECT twice to enter the Lamp counter menu. User-added image
  3. Use the down arrow key to move the pointer to Reset and then press SELECTUser-added image
  4. Select Yes then Yes again to reset the lamp counter. User-added image